Bicycle Parts That A Cyclist Needs To Know

A cyclists should have thorough knowledge of the product which he is using, to avoid mishaps. Ground rule first of all he should know  about flat tyres. A tyre is actually made up of three parts may be unscrewed. With a wrench that is often found on better valve caps. It is not enough to be the best cyclists and remain ignorant about the parts. For instance a pilot gets a thorough training about the aircraft before he finally becomes a pilot. In the same way a cyclists must know about the parts of the bicycle for eg.

Axle: Used for rotating the wheel and supports the bearings.

Bar Ends: Extensions at the end of straight handle bars to allow for multiple positions.

Bar Plugs: Plugs for the end of handle bars.

Basket: Cargo carrier.

Bearing: It is a device that helps in rotation and reduces friction, most common types are ball, roller and sleeve.

Bell: Audible device to warn the pedestrians and other cyclists, commonly known as a horn.

Belt Drive: Alternative to chain drive.

Bottle Cage: Water bottle holder.

Bottom Bracket: Bearing system that the pedals rotate around.

Brake: Devices to stop the bicycle.

Brake Lever: A lever for actuating the bicycle brake.

Braze On: A fitting protuding from a frame to provide attachment.

Cable Guide: A fitting below the bottom bracket which guides a piece of bare inner bowden cable around a corner.

Cable: It is used to connect a control, such as a brake or shifting lever, to the device it activates.

Cartridge Bearing: A type of bearing that is not user serviceable, but must be replaced as a unit.

Chain: A system of interlinking pins, plates and rollers that transmits power from the front sprocket to the rear sprocket.

Cone: Holds bearings in place, pressed against the cup.

Down Tube: It is a tube on a bicycle frame that runs from the head tube to the bottom bracket.

Hence it is not just a good to know information for a cyclists, but it is a must know piece of information about different parts of
the product. Both theory and a practical knowledge is a must inorder to be able to give a hundred percent performance in any tasks one takes up. To know more about bicycle parts click here.

Types of Bicycle Parts Available Online

A bicycle is the simplest and cheapest forms of transportation. Though it was first introduced in the 19^th century, it is still used only in moderation all over the world. A bicycle is made of different components or parts. Most of these components are available in many of the online stores at various price rates. A cycle includes many parts such as the brakes, wheels, suspension, frames, carriers, drive chains which is connected between the pedals and the wheels and handle. It also includes other accessories such as lights, bells and so forth.

Bicycle Parts Online

Wheels: One of the most important components of a bicycle includes the wheels. Different types of bicycle wheels are available in many of the online stores these days. Cycle wheels include many parts such as metal rim, pneumatic rubber tire, rubber tube, metal rim and metal hub. Different bicycles have different types of wheels.

Suspensions: The suspensions are also known as the shock absorbers of the bicycles. It is quite essential for a comfortable ride on the bicycle.

Brakes: Another important and essential component of a bicycle includes the brakes. It helps to control the movement of a bicycle and halts the cycle when required. There are brake shoes which are attached to the back and front wheels of the cycle. These brakes are attached to the steering of the cycle. Brakes can also be bought from online stores at reasonable price rates. There are a large number of dealers listed in the online stores that sell bicycle brakes at different price rates.

Frames: The frame is the focal point of the bicycle. It makes the machine by providing various points to attach the different components of the cycle. Most of the bicycle frames are diamond shaped. It includes two triangles- the rear triangle and the front triangle.

Handle bars: Another essential bicycle part includes the handle bars which provide the rider the power and ease to control the cycle. It is basically used to control the bicycle. Different types of accessories such as bells and lights are fixed on the handle-bars.

Most of these bicycle parts can be bought from online stores at reasonable price rates.

Ball Bearings Replacements in Motorcycles

Ball bearings are used in machines and wheels for proper lubrication. There are different types of ball bearings. One of the most common types includes the wheel bearings which are used in motorcycle wheels and skate boards. Although most of the ball bearings are durable, it is still susceptible to wear and tear. Wheel bearings need to be replaced at least once in the life span of the motorcycles.

Maintenance of Ball Bearings

Ball bearing need to be maintained efficiently so that it lasts for a long period of time. Motorcycles which are maintained properly seldom require any type of replacements for wheel bearings. The life span of these bearings depends on the pressure imposed on the wheel bearings and the nature of maintenance activities. Accumulation of rust and dirt can affect the functions of the ball bearing. Wheel bearings may also be damaged if the vehicles are washed in high pressure water.

Replacement of Ball Bearings

Ball bearing is definitely one of the most significant bicycle parts that need to be maintained to ensure smooth and hassle free rides. But wheel bearings may require replacements. With the right type of tools and operation manual, ball bearings can be replaced easily by an amateur mechanic. The following instructions will help to replace the bearings easily.

1. Lift the motorcycle from the ground so that the wheels are six inches above the ground.
2. Remove the axles according to the instructions in the manual. Then remove the wheels slowly.
3. Place the wheel on a flat surface and wipe the bearing area with a cloth.
4. Remove the old wheel bearing and spacer using a bearing puller.
5. Once the bearing is removed, clean the inside of the hub with a cleaner.
6. Check the size of the new bearing and install it in place using a bearing driver. Replace the spacer and install the other bearing too on the opposite side of the wheel.
7. Fix the axles and wheels as per the instructions in the manual.

It is very important to clean the wheels and keep it lubricated often. The pressure on the wheel bearings need to be reduced to maximize the efficiency of the ball bearings. Use grease to lubricate the ball bearings so that it lasts longer.